Struct style::values::specified::font::VariantLigatures
[−]
pub struct VariantLigatures { /* fields omitted */ }
Variants of ligatures
Methods
impl VariantLigatures
pub const NORMAL: VariantLigatures
NORMAL: VariantLigatures = VariantLigatures{bits: 0,}
Specifies that common default features are enabled
pub const NONE: VariantLigatures
NONE: VariantLigatures = VariantLigatures{bits: 1,}
Specifies that all types of ligatures and contextual forms covered by this property are explicitly disabled
pub const COMMON_LIGATURES: VariantLigatures
COMMON_LIGATURES: VariantLigatures = VariantLigatures{bits: 2,}
Enables display of common ligatures
pub const NO_COMMON_LIGATURES: VariantLigatures
NO_COMMON_LIGATURES: VariantLigatures = VariantLigatures{bits: 4,}
Disables display of common ligatures
pub const DISCRETIONARY_LIGATURES: VariantLigatures
DISCRETIONARY_LIGATURES: VariantLigatures = VariantLigatures{bits: 8,}
Enables display of discretionary ligatures
pub const NO_DISCRETIONARY_LIGATURES: VariantLigatures
NO_DISCRETIONARY_LIGATURES: VariantLigatures = VariantLigatures{bits: 16,}
Disables display of discretionary ligatures
pub const HISTORICAL_LIGATURES: VariantLigatures
HISTORICAL_LIGATURES: VariantLigatures = VariantLigatures{bits: 32,}
Enables display of historical ligatures
pub const NO_HISTORICAL_LIGATURES: VariantLigatures
NO_HISTORICAL_LIGATURES: VariantLigatures = VariantLigatures{bits: 64,}
Disables display of historical ligatures
pub const CONTEXTUAL: VariantLigatures
CONTEXTUAL: VariantLigatures = VariantLigatures{bits: 128,}
Enables display of contextual alternates
pub const NO_CONTEXTUAL: VariantLigatures
NO_CONTEXTUAL: VariantLigatures = VariantLigatures{bits: 256,}
Disables display of contextual alternates
pub fn empty() -> VariantLigatures
Returns an empty set of flags.
pub fn all() -> VariantLigatures
Returns the set containing all flags.
pub fn bits(&self) -> u16
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u16) -> Option<VariantLigatures>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: u16) -> VariantLigatures
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: VariantLigatures) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: VariantLigatures) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: VariantLigatures)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: VariantLigatures)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: VariantLigatures)
Toggles the specified flags in-place.
pub fn set(&mut self, other: VariantLigatures, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for VariantLigatures
impl PartialEq for VariantLigatures
fn eq(&self, __arg_0: &VariantLigatures) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, __arg_0: &VariantLigatures) -> bool
This method tests for !=
.
impl Eq for VariantLigatures
impl Clone for VariantLigatures
fn clone(&self) -> VariantLigatures
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl PartialOrd for VariantLigatures
fn partial_cmp(&self, __arg_0: &VariantLigatures) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, __arg_0: &VariantLigatures) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, __arg_0: &VariantLigatures) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, __arg_0: &VariantLigatures) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, __arg_0: &VariantLigatures) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for VariantLigatures
fn cmp(&self, __arg_0: &VariantLigatures) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
impl Hash for VariantLigatures
fn hash<__H: Hasher>(&self, __arg_0: &mut __H)
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl MallocSizeOf for VariantLigatures
[src]
fn size_of(&self, ops: &mut MallocSizeOfOps) -> usize
[src]
Measure the heap usage of all descendant heap-allocated structures, but not the space taken up by the value itself. Read more
impl Debug for VariantLigatures
impl Binary for VariantLigatures
impl Octal for VariantLigatures
impl LowerHex for VariantLigatures
impl UpperHex for VariantLigatures
impl BitOr for VariantLigatures
type Output = VariantLigatures
The resulting type after applying the |
operator.
fn bitor(self, other: VariantLigatures) -> VariantLigatures
Returns the union of the two sets of flags.
impl BitOrAssign for VariantLigatures
fn bitor_assign(&mut self, other: VariantLigatures)
Adds the set of flags.
impl BitXor for VariantLigatures
type Output = VariantLigatures
The resulting type after applying the ^
operator.
fn bitxor(self, other: VariantLigatures) -> VariantLigatures
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign for VariantLigatures
fn bitxor_assign(&mut self, other: VariantLigatures)
Toggles the set of flags.
impl BitAnd for VariantLigatures
type Output = VariantLigatures
The resulting type after applying the &
operator.
fn bitand(self, other: VariantLigatures) -> VariantLigatures
Returns the intersection between the two sets of flags.
impl BitAndAssign for VariantLigatures
fn bitand_assign(&mut self, other: VariantLigatures)
Disables all flags disabled in the set.
impl Sub for VariantLigatures
type Output = VariantLigatures
The resulting type after applying the -
operator.
fn sub(self, other: VariantLigatures) -> VariantLigatures
Returns the set difference of the two sets of flags.
impl SubAssign for VariantLigatures
fn sub_assign(&mut self, other: VariantLigatures)
Disables all flags enabled in the set.
impl Not for VariantLigatures
type Output = VariantLigatures
The resulting type after applying the !
operator.
fn not(self) -> VariantLigatures
Returns the complement of this set of flags.
impl Extend<VariantLigatures> for VariantLigatures
fn extend<T: IntoIterator<Item = VariantLigatures>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl FromIterator<VariantLigatures> for VariantLigatures
fn from_iter<T: IntoIterator<Item = VariantLigatures>>(
iterator: T
) -> VariantLigatures
iterator: T
) -> VariantLigatures
Creates a value from an iterator. Read more