Struct euclid::TypedSize2D

#[repr(C)]
pub struct TypedSize2D<T, U> {
    pub width: T,
    pub height: T,
    // some fields omitted
}

Fields

width: T

height: T

Methods

impl<T, U> TypedSize2D<T, U>

pub fn new(width: T, height: T) -> Self

Constructor taking scalar values.

impl<T: Clone, U> TypedSize2D<T, U>

pub fn from_lengths(width: Length<T, U>, height: Length<T, U>) -> Self

Constructor taking scalar strongly typed lengths.

impl<T: Round, U> TypedSize2D<T, U>

pub fn round(&self) -> Self

Rounds each component to the nearest integer value.

This behavior is preserved for negative values (unlike the basic cast).

impl<T: Ceil, U> TypedSize2D<T, U>

pub fn ceil(&self) -> Self

Rounds each component to the smallest integer equal or greater than the original value.

This behavior is preserved for negative values (unlike the basic cast).

impl<T: Floor, U> TypedSize2D<T, U>

pub fn floor(&self) -> Self

Rounds each component to the biggest integer equal or lower than the original value.

This behavior is preserved for negative values (unlike the basic cast).

impl<T: Copy + Clone + Mul<T>, U> TypedSize2D<T, U>

pub fn area(&self) -> T::Output

impl<T, U> TypedSize2D<T, U> where
    T: Copy + One + Add<Output = T> + Sub<Output = T> + Mul<Output = T>, 

pub fn lerp(&self, other: Self, t: T) -> Self

Linearly interpolate between this size and another size.

t is expected to be between zero and one.

impl<T: Zero + PartialOrd, U> TypedSize2D<T, U>

pub fn is_empty_or_negative(&self) -> bool

impl<T: Zero, U> TypedSize2D<T, U>

pub fn zero() -> Self

impl<T: Copy, U> TypedSize2D<T, U>

pub fn width_typed(&self) -> Length<T, U>

Returns self.width as a Length carrying the unit.

pub fn height_typed(&self) -> Length<T, U>

Returns self.height as a Length carrying the unit.

pub fn to_array(&self) -> [T; 2]

pub fn to_vector(&self) -> TypedVector2D<T, U>

pub fn to_untyped(&self) -> Size2D<T>

Drop the units, preserving only the numeric value.

pub fn from_untyped(p: &Size2D<T>) -> Self

Tag a unitless value with units.

impl<T: NumCast + Copy, Unit> TypedSize2D<T, Unit>

pub fn cast<NewT: NumCast + Copy>(&self) -> Option<TypedSize2D<NewT, Unit>>

Cast from one numeric representation to another, preserving the units.

When casting from floating point to integer coordinates, the decimals are truncated as one would expect from a simple cast, but this behavior does not always make sense geometrically. Consider using round(), ceil() or floor() before casting.

pub fn to_f32(&self) -> TypedSize2D<f32, Unit>

Cast into an f32 size.

pub fn to_f64(&self) -> TypedSize2D<f64, Unit>

Cast into an f64 size.

pub fn to_usize(&self) -> TypedSize2D<usize, Unit>

Cast into an uint size, truncating decimals if any.

When casting from floating point sizes, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_i32(&self) -> TypedSize2D<i32, Unit>

Cast into an i32 size, truncating decimals if any.

When casting from floating point sizes, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_i64(&self) -> TypedSize2D<i64, Unit>

Cast into an i64 size, truncating decimals if any.

When casting from floating point sizes, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

impl<T, U> TypedSize2D<T, U> where
    T: Signed, 

pub fn abs(&self) -> Self

pub fn is_positive(&self) -> bool

Trait Implementations

impl<T: Copy + Add<T, Output = T>, U> Add<TypedSize2D<T, U>> for TypedPoint2D<T, U>

type Output = Self

The resulting type after applying the + operator.

fn add(self, other: TypedSize2D<T, U>) -> Self

Performs the + operation.

impl<T: Clone, U> Clone for TypedSize2D<T, U>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Copy, U> Copy for TypedSize2D<T, U>

impl<'de, T, U> Deserialize<'de> for TypedSize2D<T, U> where
    T: Deserialize<'de>, 

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error> where
    D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl<T, U> Serialize for TypedSize2D<T, U> where
    T: Serialize, 

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error> where
    S: Serializer, 

Serialize this value into the given Serde serializer.

impl<T, U> Eq for TypedSize2D<T, U> where
    T: Eq, 

impl<T, U> PartialEq for TypedSize2D<T, U> where
    T: PartialEq, 

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<T, U> Hash for TypedSize2D<T, U> where
    T: Hash, 

fn hash<H: Hasher>(&self, h: &mut H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<T: Debug, U> Debug for TypedSize2D<T, U>

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<T: Display, U> Display for TypedSize2D<T, U>

fn fmt(&self, formatter: &mut Formatter) -> Result

Formats the value using the given formatter.

impl<T: Copy + Add<T, Output = T>, U> Add for TypedSize2D<T, U>

type Output = Self

The resulting type after applying the + operator.

fn add(self, other: Self) -> Self

Performs the + operation.

impl<T: Copy + Sub<T, Output = T>, U> Sub for TypedSize2D<T, U>

type Output = Self

The resulting type after applying the - operator.

fn sub(self, other: Self) -> Self

Performs the - operation.

impl<T: Zero, U> Zero for TypedSize2D<T, U>

fn zero() -> Self

impl<T: Copy + Mul<T, Output = T>, U> Mul<T> for TypedSize2D<T, U>

type Output = Self

The resulting type after applying the * operator.

fn mul(self, scale: T) -> Self

Performs the * operation.

impl<T: Copy + Div<T, Output = T>, U> Div<T> for TypedSize2D<T, U>

type Output = Self

The resulting type after applying the / operator.

fn div(self, scale: T) -> Self

Performs the / operation.

impl<T: Copy + Mul<T, Output = T>, U1, U2> Mul<TypedScale<T, U1, U2>> for TypedSize2D<T, U1>

type Output = TypedSize2D<T, U2>

The resulting type after applying the * operator.

fn mul(self, scale: TypedScale<T, U1, U2>) -> TypedSize2D<T, U2>

Performs the * operation.

impl<T: Copy + Div<T, Output = T>, U1, U2> Div<TypedScale<T, U1, U2>> for TypedSize2D<T, U2>

type Output = TypedSize2D<T, U1>

The resulting type after applying the / operator.

fn div(self, scale: TypedScale<T, U1, U2>) -> TypedSize2D<T, U1>

Performs the / operation.